Raspberry Pi's for Octoprint

Octoprint is Awesome! (We should donate to help keep it awesome!)

https://octoprint.org/

"Recommended hardware: Raspberry Pi 3B, 3B+, 4B or Zero 2. Expect print artifacts and long loading times with other options, especially when adding a webcam or installing third party plugins"

• Raspberry Pi Zero 2 W

  • Heat is rarely a problem if stick on"stick-on" Heatsinks are used with some vent holes in the case (No Fan)

    • https://www.thingiverse.com/thing:3572030

  • Micro-USB OTG USB hub with power input (Allows accessories to plugin)
    • https://www.amazon.com/TUSITA-Adaptor-Charging-Adapter-Raspberry/dp/B00LTHBCNM

  • Logitech c270

    • • https://www.amazon.com/Logitech-Widescreen-Correction-Noise-Reducing-FaceTime/dp/B01BGBJ8Y0/

      • https://www.thingiverse.com/thing:3081838

• Raspberry Pi 3B+

  • Heat is rarely a problem if stick on Heatsinks are used with some vent holes in the case (No Fan)
    • https://www.thingiverse.com/thing:2620241
  • Logitech c270
    • https://www.amazon.com/Logitech-Widescreen-Correction-Noise-Reducing-FaceTime/dp/B01BGBJ8Y0/
    • https://www.thingiverse.com/thing:3081838

• Raspberry Pi 4

  • Great aluminum housing/heatsink for the Pi 4
    • https://www.amazon.com/Geekworm-Raspberry-Computer-Aluminum-Compatible/dp/B07VD568FB/
  • 5v fan screwed(M3) into the fins of the heatsink and plugged into the GPIO pins
    • https://www.amazon.com/Noctua-Cooling-Bearing-NF-A4X10-FLX-5V/dp/B00NEMGCIA/
    • https://www.thingiverse.com/thing:4837562
  • Logitech c270
    • https://www.amazon.com/Logitech-Widescreen-Correction-Noise-Reducing-FaceTime/dp/B01BGBJ8Y0/
    • https://www.thingiverse.com/thing:3081838

My Resin printer does not work with Octoprint, so I used a Raspberry Pi Zero W to make a windows SMB shared folder that is accessible wirelessly and connects to the USB thumb drive port on the Resin Printer (see Resin Printing section)